Fixed Carbon Film Resistor for PCB
- Product Details
Carbon Resistors are the most common type of Composition Resistors. Carbon resistors are a cheap general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite (similar to pencil lead) and a non-conducting ceramic (clay) powder to bind it all together.
Carbon Resistor
The ratio of carbon dust to ceramic (conductor to insulator) determines the overall resistive value of the mixture and the higher the ratio of carbon, the lower the overall resistance. The mixture is moulded into a cylindrical shape with metal wires or leads are attached to each end to provide the electrical connection as shown, before being coated with an outer insulating material and colour coded markings to denote its resistive value.
Carbon Resistor
The Carbon Composite Resistor is a low to medium type power resistor which has a low inductance making them ideal for high frequency applications but they can also suffer from noise and stability when hot. Carbon composite resistors are generally prefixed with a “CR” notation (eg, CR10kΩ ) and are available in E6 ( ± 20% tolerance (accuracy) ), E12 ( ± 10% tolerance) and E24 ( ± 5% tolerance) packages with power ratings from 0.250 or 1/4 of a Watt up to 5 Watts.
Carbon composite resistor types are very cheap to make and are therefore commonly used in electrical circuits. However, due to their manufacturing process carbon type resistors have very large tolerances so for more precision and high value resistances, film type resistors are used instead.
Basic Info
Function for Resistance: Protective Resistor
Material: Carbon Film Resistor
Type: Photoresistor
Product Name: Fixed Carbon Film Resistor for PCB
Environmental Certification: ISO14000
Power Rating: 1/6W-2W
Specification: ISO14000, ISO9001: 2008
HS Code: 8533219000
Resistance: Fixed Resistor
Installation: DIP Resistor
Packaging: Throught Hole
Quantity: Single Connection
Quality Certification: ISO9001: 2008
Tolerance: 5%,10%
Product Description
Specifications of ceramic wire wound resistor
1. Heat and flame resistant
2. Completely insulated character suitable for printed circuit board
3. Carbon film resistors have many kinds of types.
4. Performances are stable
5. ROHS certification.
6. Resistance tolerance: ± 5%, ± 10%, ± 2%
Remark:
1. Special lead length(H) on request
2. Special registance on request
3. Flameproof type also available
| terminal strength | no dange ΔRmax ±0.3% or 0.5 |
| soldering | good thing no dange ΔRmax ±0.5% or 0.5 |
| temperature cycling | ΔRmax ±0.5% |
| vibration | no dange ΔRmax ±0.5% or 0.5 |
| moisture resistance | ΔRmax ±3% |
| load life | ΔRmax ±2.5% |
| temperature coefficient | |
| dielectric strength | 2×work.volt no breakdown ΔRmax ±0.5% |
| insulation resistance | min10 |
| short time overload | ΔRmax ±0.5% |
| resistance to solvents | no dange |
Advantage of our company:
1. Competitive price
2. High stability and high quality
3. Prompt shipment
4.quick response to the needs of our customers
5.wide range products
6.professional & experienced management team
Don't hesitate to contact us if you have any interest in our products,welcome to provide us your specification,we will submit the best quotation shortly.
It's our pleasure to be on service of you.Welcome to give us inquiry.
