Manufacturer of medical-grade high-temperature resistant, low-DCR value heating flexible circuit boards
pcbgate251213152
Product Definition: Medical devices refer to instruments, apparatuses, in vitro diagnostic reagents and calibrators, materials, and other similar or related items that are directly or indirectly used on the human body. Heating sheets are widely used in the medical device industry. They heat the substances inside the equipment to reach the set temperature. The built-in temperature sensing wire can continuously monitor the temperature and keep the heating at a certain level. Additionally, the fuse can ensure that the power is cut off and the heating is stopped in time in case of equipment failure.
The product forms of medical device heating sheets are mostly single panels, with PI film as the main material. They have the characteristics of light weight and thinness, as well as being resistant to bending. This product can be exposed to special environments such as vacuum, oil, and chemicals. It can control the heating area, and the heating speed, electrical parameters, and size can all be customized according to the customer's needs. We can provide ODM services for circuit board components based on the PI film heating sheet process for customers.
Product features and highlights: High temperature resistance, lightweight, flexible, and capable of withstanding bending. There are certain requirements for the DCR value.
Product application: Temperature sensing heating, medical heating sheet, used in blood analyzers, ventilators, syringe heating, nucleic acid testing machines, electric heating physiotherapy devices.
The product forms of medical device heating sheets are mostly single panels, with PI film as the main material. They have the characteristics of light weight and thinness, as well as being resistant to bending. This product can be exposed to special environments such as vacuum, oil, and chemicals. It can control the heating area, and the heating speed, electrical parameters, and size can all be customized according to the customer's needs. We can provide ODM services for circuit board components based on the PI film heating sheet process for customers.
Product features and highlights: High temperature resistance, lightweight, flexible, and capable of withstanding bending. There are certain requirements for the DCR value.
Product application: Temperature sensing heating, medical heating sheet, used in blood analyzers, ventilators, syringe heating, nucleic acid testing machines, electric heating physiotherapy devices.
Quantity:
1.00
Unable to ship to shipping address, please feedback to us
Manufacturer of medical-grade high-temperature resistant, low-DCR value heating flexible circuit boards
Specifications:
Product hole: Minimum metallized hole: None Minimum non-metallized hole: None
Product line: Minimum line width: 0.18 ± 0.02 mm Minimum line spacing: 0.12 ± 0.02 mm
Finished product dimensions: 28.39 * 19.45 * 0.18 mm
Functional testing: Open circuit test, LCR test, reliability test, thermal shock test, product certification-related tests, RoHS certification
Product line: Minimum line width: 0.18 ± 0.02 mm Minimum line spacing: 0.12 ± 0.02 mm
Finished product dimensions: 28.39 * 19.45 * 0.18 mm
Functional testing: Open circuit test, LCR test, reliability test, thermal shock test, product certification-related tests, RoHS certification
--Written by Liya-25.12.27
PCB product Capacity
| Value | Specification |
PCB Max. size | 510mm*1200mm(SMT) |
| Remarks | High Tg CCL is Available(Tg>=180℃) |
| Finish Board Thickness | 0.2 mm-6.00mm(8mil-126mil) |
| Surface Finish | Gold finger(>=0.13um), Immersion Gold(0.025-0075um), Plating Gold(0.025-3.0um), HASL(5-20um), OSP(0.2-0.5um) |
| Shape | Routing、Punch、V-cut、Chamfer |
| Surface Treatment | Solder Mask(black, green, white, red, blue, thickness>=12um, Block, BGA) |
| Silkscreen(black, yellow, white) | |
| Peel able-mask(red, blue, thickness>=300um) | |
| Minimum Core | 0.075mm(3mil) |
| Copper Thickness | 1/2 oz min; 12oz max |
| Min Trace Width & Line Spacing | 0.075mm/0.1mm(3mil/4mil) |
| Min Hole Diameter for CNC Drilling | 0.1mm(4mil) |
| Min Hole Diameter for Punching | 0.6mm(35mil) |
| Biggest panel size | 610mm * 508mm |
| Hole Position | +/-0.075mm(3mil) CNC Drilling |
| Conductor Width(W) | +/-0.05mm(2mil) or +/-20% of original |
| Hole Diameter(H) | PTHL:+/-0.075mm(3mil) |
| Non PTHL:+/-0.05mm(2mil) | |
| Outline Tolerance | +/-0.1mm(5mil) CNC Routing |
| Warp & Twist | 0.70% |
| Insulation Resistance | 10Kohm-20Mohm |
| Conductivity | <50ohm |
| Test Voltage | 10-300V |
| Panel Size | 110 x 100mm(min) |
| 660 x 600mm(max) | |
| Layer-layer misregistration | 4 layers:0.15mm(6mil)max |
| 6 layers:0.25mm(10mil)max | |
| Min spacing between hole edge to circuitry pattern of an inner layer | 0.25mm(10mil) |
| Min spacing between board outline to circuitry pattern of an inner layer | 0.25mm(10mil) |
| Board thickness tolerance | 4 layers:+/-0.13mm(5mil) |
Flexible PCB product Capacity
| Value | Capabilities |
| Items | FR-4, FR1,FR2; CEM-1, CEM-3,Rogers,Teflon,Arlon,Aluminum Base, Copper Base,Ceramic, Crockery, etc. |
| Layers | FPC：1 to 6 Layers,Rigid Flex：2 to 10 Layers |
| Base Copper Thickness | 1/3 oz to 2oz |
| Regular Base Material Thickness | 12.5um to 50um（FPC） |
| 0.1mm to 3.2mm（Rigid） | |
| Regular Coverlay Thickness | 27um to 50um |
| Regular Adhesive Thickness | 12um to 25um |
| Blind or Buried Vias | Yes |
| Impedance Control | Yes |
| Min.Line Width/Spacing | 0.04mm/0.04mm |
| Surface Finishing | Electroplate Ni/Au（Flash gold/Soft gold/Hard gold）,ENIG,Immersion Tin; plated silver;immersion silver ; OSP,HASL |
| Outline Fabrication | Die cut,laser cut,CNC routing,V-scoring |
| Hole to edge(Hard tool/Die Cut) | ±0.1/±0.2mm |
| Edge to edge(Hard tool/Die Cut) | ±0.05/±0.2mm |
| Circuit to edge(Hard tool/Die Cut) | ±0.07/±0.2mm |
PCB Assembly(SMT) Product Capacity
| Value | SMT Capacity |
| PCB Max. size | 510mm*1200mm(SMT) |
| Chip component | 01005,0201, 0402, 0603, 0805, 1206 package |
| Min.pin space of IC | 0.1mm |
| Min. space of BGA | 0.1mm |
| Max.precision of IC assembly | ±0.01mm |
| Surface Treatment | ≥8 million pionts/day |
| 6 DIP production lines | |
| Assembly testing | Current test, voltage test, high temperature and low temperature test. |
| Drop Impact Test,aging test,water proof test,leakage-proof test and etc. | |
| Different test can be done according to your requirement. |
Quality Control
Customers Visit our factory
Exhibition Show
Munich Exhibition&Moscow：
Russia Exhibition：
Q1:Are you a factory or trade company?
A: Xing Da Electronic Technology Co., ltd is leading OEM PCB&PCBA manufacturer in China with over 14 years rich experience. Our aim is “One-Stop service, smart manufacturing, make your production easier.”
Q2: What is needed for quotation?
A:1. PCB&FPC
We need Gerber files and specification for quotation
2. PCBA (= PCBA+ components + Assembly)
For PCBA, please send Gerber files, specification and Bom list for factory price.
A: Xing Da Electronic Technology Co., ltd is leading OEM PCB&PCBA manufacturer in China with over 14 years rich experience. Our aim is “One-Stop service, smart manufacturing, make your production easier.”
Q2: What is needed for quotation?
A:1. PCB&FPC
We need Gerber files and specification for quotation
2. PCBA (= PCBA+ components + Assembly)
For PCBA, please send Gerber files, specification and Bom list for factory price.
Q3:Is my PCB or PCBA files safe if I send it to you for manufacturing?
A: We respect customer's design authority and will never manufacture PCB or PCBA for someone else without your permission. We never share customer documents with third parties.NDA is acceptable.
Q4:What payment do you accept ?
A: T/T,Western Union,Paypal, L/C,Credit Card, Cheque,Others
A: We respect customer's design authority and will never manufacture PCB or PCBA for someone else without your permission. We never share customer documents with third parties.NDA is acceptable.
Q4:What payment do you accept ?
A: T/T,Western Union,Paypal, L/C,Credit Card, Cheque,Others
Q5: What's your shipping method?
A: 1. We have our own forwarders to ship goods with competitive price by DHL, UPS, FEDEX, TNT,EMS etc. We can also arrange shipments via sea or air depending on your specific requirements."
2. If you have your own forwarder, we can cooperate with them.
Q6: How about the MOQ?
A: There is no MOQ. We can produce prototypes, small orders, or large volumes.
A: 1. We have our own forwarders to ship goods with competitive price by DHL, UPS, FEDEX, TNT,EMS etc. We can also arrange shipments via sea or air depending on your specific requirements."
2. If you have your own forwarder, we can cooperate with them.
Q6: How about the MOQ?
A: There is no MOQ. We can produce prototypes, small orders, or large volumes.
